Help Needed: 2011 Silverado Tire Pressure Sensor Issues

Maintenance and Repairs
1

I’m having some trouble with my 2011 Chevy Silverado’s tire pressure sensors, and I could really use some advice. Here’s what I’m dealing with:

Background

Recently, I’ve noticed that my tire pressure warning light keeps coming on, even after I’ve checked and adjusted the tire pressures. I suspect there might be an issue with the tire pressure monitoring system (TPMS) sensors. I’ve done a bit of reading but could use some extra help on the following topics:

Common Issues

  • Faulty Sensors: How do I know if one or more of the sensors are malfunctioning?
  • Replacing Sensors: What’s the procedure for replacing a tire pressure sensor on a 2011 Silverado? Are there specific brands I should look for?
  • Programming/Resetting: After replacing a sensor, how do I reset the TPMS? Do I need any special tools or software?

DIY Resources

If anyone has links to good DIY repair videos or tutorials, that would be super helpful. I’d rather tackle this myself if possible.

Where to Buy

Also, where’s the best place to purchase replacement sensors or tools? Any recommendations for reliable online retailers?

I appreciate any insights you can share! Thanks in advance for your help.

2

I’ve had constant trouble with my TPMS in my 2011 Silverado. The readings are often wrong, and the warning light just keeps blinking. It’s frustrating when you’re trying to ensure your tires are safe!

6 Likes
3

I can relate! My Silverado’s sensor went off randomly, showing low pressure when I just had my tires checked. It’s really annoying!

4

It seems like a widespread issue with the 2011 models. I’ve replaced a sensor twice in the last year! Have any of you found a permanent fix for this?

4 Likes
5

I’ve heard that many Silverado owners have run into similar problems with false readings. Some suggest reprogramming the sensors could help. Has anyone tried that?

6

Reprogramming worked for me! It cleared up most of the false alarms. Just be careful, as it can be tricky if you’re not familiar with the process.

7

I don’t mean to sound cynical, but is it just a way for Chevy to get us to spend more on repairs? The sensors keep malfunctioning, and it’s costing me!

8

My sensor stopped working altogether last summer! Have you guys dealt with that? Do I need to just replace it, or is there another solution?

9

That’s rough! I had a similar issue, and after replacing the battery in the sensor, it actually started working again. Might be worth checking!

6 Likes
10

You guys are making me laugh! My Silverado is like a teenager with mood swings – one moment the sensor is fine, the next it’s throwing a fit! Anyone has tips on calming it down?

11

Haha, love the analogy! But seriously, it might just be a compatibility issue with tire brands. Have you checked if the tires are TPMS-compatible?

12

I had a similar issue with my 2011 Silverado. First, you should check the tire pressure manually and compare it with the sensor readings. If there’s a significant difference, your sensors might be off.

13

Great tip! Make sure to recalibrate the sensors afterward. You can usually reset them by driving at 50 mph for 10 minutes.

14

In addition to checking pressure, don’t forget to look for any damaged sensors. If they’re broken, they’ll need to be replaced. It’s tricky if you’ve never done it before, so consult your manual.

15

I had to replace one of my sensors last year! It was surprisingly easy, just some 10mm bolts and a bit of patience. Make sure you have the right tools handy.

2 Likes
16

How do I know if a sensor is really broken? Any visual signs or something I should look for?

17

If they’re corroded or showing signs of physical damage, that’s a big clue! Also, if you’re getting consistent faults, it’s likely they are the problem.

18

Resetting the system can also be done by disconnecting the battery for a few minutes! Just remember to reconnect it properly; I’ve heard horror stories about that going wrong.

19

But what if the sensors are working fine, but I still get warning lights? Is it a wiring issue then?

20

Exactly, it could be wiring issues or even a faulty reset. It’s a good idea to check the wiring for wear or breakage as well.

2 Likes