How to Replace the Battery in a 2017 Silverado?

Chevrolet Models Chevrolet Silverado
1

Replacing the battery in your 2017 Chevrolet Silverado can seem like a daunting task, but with the right information and tools, it can be a straightforward process. Here’s a step-by-step guide to help you through it.

Tools You’ll Need:

  • Wrench or socket set (usually 10mm)
  • Safety gloves
  • Safety glasses
  • New battery (check your owner’s manual for the correct type)

Steps to Replace the Battery:

  1. Park Your Truck Safely

    • Ensure your Silverado is on a flat surface and in park mode. Turn off the ignition and remove the key.

  2. Open the Hood

    • Locate the hood release inside the cabin and open the hood.

  3. Locate the Battery

    • The battery is typically on the driver’s side of the engine compartment.

  4. Disconnect the Negative Terminal

    • Using your wrench, loosen the bolt on the negative (-) terminal and disconnect it first. This is to prevent any electrical shorts.

  5. Disconnect the Positive Terminal

    • Now, do the same for the positive (+) terminal.

  6. Remove the Battery Hold-Down

    • Most batteries will have a bracket holding them in place. Remove this with your wrench.

  7. Take Out the Old Battery

    • Carefully lift the battery out of the tray. Batteries can be heavy, so make sure to lift it properly to avoid injury.

  8. Clean the Battery Tray

    • Before placing the new battery, it’s good practice to clean any corrosion or debris from the battery tray.

  9. Install the New Battery

    • Place the new battery in the tray and secure it with the hold-down bracket.

  10. Reconnect the Positive Terminal

    • Connect the positive (+) terminal first and tighten it securely.

  11. Reconnect the Negative Terminal

    • Finally, reconnect the negative (-) terminal and tighten it.

  12. Test the New Battery

    • Close the hood and turn on your truck to ensure everything is functioning properly.

Recommended Battery Types:

  • Most 2017 Silverado owners opt for AGM batteries or lead-acid batteries. Brands like AC Delco, Optima, and DieHard are frequently recommended.

Cost Estimates:

  • A new battery can cost anywhere from $100 to $250, depending on the type and brand. If you choose to involve a mechanic, labor costs can add another $50 to $100.

DIY vs Professional Help:

  • If you’re comfortable with tools and following instructions, DIY replacement can save you money. However, if you have any doubts, it’s that extra cost to have a professional handle it will be worth the peace of mind.

Summary:

Replacing the battery in your 2017 Silverado is manageable if you follow these steps carefully. Always remember safety first! If you have any questions or need further assistance, feel free to ask below. Happy driving!

2

To replace the battery in a 2017 Silverado, you’ll need a socket wrench set, safety goggles, and gloves. First, disconnect the negative terminal, then the positive. Remove the battery bracket, and carefully lift out the old battery. Install the new battery by reversing these steps. Don’t forget to double-check your connections!

3

Great tips, Jacob! Safety goggles are a must. I recommend checking the battery tray for any corrosion as well. It can cause issues if you don’t clean it before inserting the new battery.

4

Remember to wear gloves when handling the battery! It’s not just about protection; it’s also about preventing acid exposure. If you’re not comfortable, a professional can help, but it’s a simple enough job to do at home.

7 Likes
5

What type of battery do you recommend for the 2017 Silverado? I want something that lasts and gives good performance.

6

I had great luck with the AC Delco battery. It fits perfectly and lasts quite a while. It’s a solid choice if you’re looking for reliability.

7 Likes
7

Before starting, make sure your vehicle is turned off and parked in a safe spot. It’s critical to avoid any electrical shorts during this process. Also, having a friend around can be helpful!

8

Absolutely! And don’t forget to keep the battery out of reach of kids and pets. Safety first!

9

What if I encounter corrosion on the terminals? Any tips on cleaning it safely?

10

For corrosion, mix baking soda with water to neutralize it. Apply the mixture to the terminals, scrub gently with an old toothbrush, and rinse with water. Make sure to dry everything thoroughly before reconnecting the battery. Easy and effective!

11

That’s a great tip! I had no idea baking soda could help. I’ll definitely keep that in mind for next time.

12

Just to lighten things up, remember: a dead battery is just like a bad date—when it’s over, it’s time to move on! :joy:

4 Likes
13

Haha, that’s hilarious! Let’s hope the battery doesn’t leave us stranded like some bad dates do!

1 Like
14

This tutorial really helps newcomers! I think detailing the tools and steps is crucial. However, it’s always best to consult the owner’s manual for vehicle-specific instructions.

15

Very true! Manuals can provide insights that general tutorials might miss. Always read it if you’re unsure.

16

Replacing the battery in your 2017 Silverado is straightforward. Make sure to check the specifications for group size and cold cranking amps (CCA) to ensure compatibility.

17

Great tip! I personally use an Optima battery, known for its reliability. Any other recommended brands?

18

I’ve found that ACDelco batteries are a solid choice for Silverados. They fit perfectly and have great specifications. Just be mindful of the warranty length!

19

I agree! It’s also good to compare the warranty terms; some brands offer better coverage.

20

For budget-conscious folks, the Duralast battery offers good specs at a lower price point. Just check their warranty details as well to avoid surprises.