Tips for Cleaning Plasti Dip Rims on Your Chevy

If you’ve gone through the process of Plasti Dipping your rims on your Chevrolet, you probably want to keep them looking their best! Here’s a comprehensive guide on how to clean Plasti Dip rims without damaging the finish.

Why Clean Plasti Dip Rims?

Keeping your rims clean not only maintains their appearance but also extends the life of the Plasti Dip. Dirt and grime can make the finish dull and may lead to peeling if not addressed.

Cleaning Supplies Needed

  • Mild soap or a dedicated car wash soap: Avoid anything harsh or abrasive.
  • Water: Use a hose or bucket.
  • Soft sponge or microfiber cloth: These are key to preventing scratches.
  • Wheel brush: Optional, but useful for detailed cleaning.
  • Tire shine (if desired): For that extra pop!

Step-by-Step Cleaning Process

  1. Rinse Thoroughly: Start by rinsing the rims with water. This will help to loosen any dirt or debris that’s stuck to the surface.
  2. Prepare Soap Solution: Mix the mild soap with water in a bucket, following the instructions on the soap bottle.
  3. Wash Gently: Soak your sponge or cloth in the soapy water and gently wash the rims. Make sure to avoid any abrasive materials that could scratch the Plasti Dip.
  4. Use a Wheel Brush for Hard-to-Reach Areas: If your rims have tight spots, use a wheel brush to get in there without damaging the coating.
  5. Rinse Again: After washing, rinse the rims thoroughly with clean water to remove all soap residue.
  6. Dry: Use a microfiber cloth to dry off the rims. This helps avoid water spots and keeps your rims looking shiny.
  7. Apply Tire Shine (optional): If you want your tires to match, applying tire shine can give a nice finish!

Additional Tips

  • Avoid Harsh Chemicals: Do not use any harsh chemicals or all-purpose cleaners. They can cause the Plasti Dip to break down.
  • Regular Maintenance: Try to wash your rims regularly to prevent buildup of dirt and grime.
  • Check for Peeling: While cleaning, keep an eye out for any peeling or damage to the Plasti Dip. If you spot any issues, it might be time for a touch-up!

By following these steps, you can keep your Plasti Dip rims looking fresh and new. Enjoy cruising in your clean Chevy! If you have any additional tips or questions, feel free to share them below.

Before you start cleaning those Plasti Dip rims, make sure you have a bucket, mild soap, and a soft brush. Avoid harsh chemicals that can damage the finish.

Great tips, iwhite! You should also consider using a spray wax after cleaning. It helps protect the Plasti Dip and maintains the shine!

Don’t forget to wear gloves! You don’t want those cleaning solutions drying out your skin. It’s all about protecting yourself while you beautify your Chevy!

Absolutely! And knee pads wouldn’t hurt if you’re cleaning at ground level. Comfort is key!

7 Likes

I usually start with rinsing the rims with water to remove loose dirt. It’s a good prep step before applying any soap or cleaner.

That’s a smart move! By the way, what kind of soft brush do you all recommend? I’ve seen different types.

I like using a wheel brush with soft bristles. It conforms to the rim shape and won’t scratch the Plasti Dip. Super effective!

Good recommendation! I’ve heard about some people using toothbrushes. What do you think? Seems a bit unconventional.

Toothbrushes can work, but they might take longer for larger rims! Stick with a proper wheel brush for efficiency, unless you’re in a pinch.

7 Likes

Fair enough! Now, should we be concerned about water spots after rinsing? How do we avoid those?

3 Likes

Cleaning Plasti Dip rims is a breeze if you follow the right steps! Start by rinsing them with water to remove loose dirt. Then, use a gentle detergent mixed with water and a soft sponge to clean the surface. Avoid harsh chemicals, as they can damage the finish.

Thanks for the tips! I’ve been hesitant to clean mine because I didn’t want to ruin the finish. What kind of sponge do you recommend?

Definitely use a microfiber sponge! It’s soft enough to prevent scratches while effectively lifting dirt and grime. Just make sure to rinse it often while cleaning.

Another great tip is to apply a sealant after cleaning. It helps protect the Plasti Dip from future dirt accumulation and keeps it looking fresh longer!

What type of sealant do you suggest? I’d like something easy to apply yet effective.

I recommend a spray-on sealant specifically designed for Plasti Dip. They’re easy to use and don’t require much prep. Just spray it on and buff it out for a shiny finish!

Remember to avoid pressure washers! They can peel off Plasti Dip if you’re not careful. A simple bucket and sponge work wonders.

6 Likes

Good point! I was thinking about using mine. What about wheel cleaners? Are those safe to use?

6 Likes

Most wheel cleaners are too harsh for Plasti Dip. Stick with mild soap and water to keep the finish intact. Better safe than sorry!