Good advice! I’ll give that a try. Any other tips to restore fuel pump operation?
Make sure to check the fuses as well. A blown fuse might be preventing power to the relay. If all else fails, consider replacing the relay entirely; they can wear out over time.
Replacing it is a good idea. How much does a new relay usually cost?
You can usually find them for around $10 to $30 depending on where you shop. Not too expensive for peace of mind!
That’s reasonable! Is there a chance the fuel pump itself could be the issue?
Absolutely! If the relay and wiring check out, the fuel pump might be the culprit. Listen for it when you turn the key; if you don’t hear it, it could be time for a pump replacement.
I would laugh if it turned out to be a simple fix! Might be worth checking the simplest solutions first, right?
Indeed! Sometimes the simplest things lead us to the biggest problems—like forgetting to check the fuel level! Just make sure you’re thorough. Good luck!
Hey everyone! I’m trying to locate the fuel pump relay on my '91 S10. Can anyone help?
The fuel pump relay is usually located under the dash, to the left of the steering column. Check the relay box. You might also want to check the owner’s manual for specifics.
I just replaced mine last month! You’ll need a 10mm socket to remove the panel underneath the steering wheel. It’s a bit cramped, but totally doable!
Great tip! I’ll make sure to grab that. What replacement relay do you recommend?
While we’re at it, does anyone have a guide for the process? I’m a bit nervous about the installation.
It’s simple! Start by disconnecting the battery, then locate and remove the old relay, and just plug in the new one. Follow that by reconnecting the battery.
Definitely a straight-forward job! Just beware of those pesky wires! They can be a bit tangled.
I hear you! I had to use a flashlight just to find everything. LOL!
Remember to take your time and double-check connections! It’s not a race.
Wise words. Is there any special tool to crimp new wire connectors if needed?
A good crimping tool will do the job! Just make sure it’s a quality one so that the connections are solid.
You know, thinking back, it’s really satisfying to fix your own vehicle. Just take it slow, and you’ll be proud of your work!